Condition: 100% brand new
Shell Color: black
LED Light Color: Blue
Voltage: DC 12V
Black Display Case Size: 6.4 * 5.1 * 2.6cm/2.5 * 2.0 * 1.0in
Black Control Unit Case Size: 10 * 1.8 * 1.2cm/3.9 * 0.7 * 0.5in
Package Weight: approx.144g/5.1oz
Fitment: universal fit for all vehicles with a 12 volt switched power source
1) The power is taken from the socket below the steering wheel. The specific wires are afraid of vehicle differences. The insurance point is to use a multimeter to measure it
2) Firewire: 12v power without key.
3) The first section (green line of the delay device): The key is turned on to the first grid and then 12V is turned on, and the key is turned off. The second segment (timer blue line): The key is turned to the last compartment (without the engine) and has 12v power. When the key is turned back to the first segment, the power is turned off.
4) The handbrake line can try to reach out from the gap at the front end of the handbrake by hand, and it is a brown-blue line covered with a plastic sleeve. Be careful not to pull hard, and avoid pulling down the handbrake connector. If not, you can only remove the armrest box. The armrest must be removed from the front as a whole.
1 * Turbo Timer Device
1 * Relay Unit
1 * User Manual
3 * Zip Tie
2 * Double Sided Tape
1. Please read this manual carefully before installing, professional installation is highly recommended.
2. The oxygen sensor light is grounded when not in use
3. Handbrake switch needs to be confirmed: when the engine is on, pull up the handbrake is 0v, put down the handbrake is 12v